This water supply distributor is needed to support cleaning jobs in the factory. This is useful for temporarily storing water from its source, which can be in the form of a well, hydrant, or water tanker. As the name implies, the Water Supply Distributor will distribute water from its source through one input to the reservoir, then forward it to several outputs which will enter each pump unit.
What are the benefits of the Water Supply Distributor?
Among others are :
1. Efficient use of a hose or water hose to drain water from the water source to the pumping machine
2. Reducing the risk of cavitation due to water flow
3. Control the discharge of water from the water source that enters the pump so that it doesn't spill out
4. Can reduce the presence of dirt or foreign objects that participate in the flow of water to the pump machine
The things that will happen if you don't use a Water Supply Distributor including :
1. Dirt or foreign matter flows and mixes in the pump unit water tank which can cause damage or wear to the pump components
2. Cavitation which causes scratches and even cracks to occur is due to the presence of air bubbles due to the effect of the lack of supply of water flow in the water tank pump required at ideal engine Rpm
Those are some of the benefits and functions of the water supply distributor that I explained in the article, for waterjet users to consider in their application for every cleaning job. Especially at some sites that are very concerned about water use.
To support the performance of the water supply distributor, it is recommended to use an additional booster pump, so that the water supply to the water tank is sufficient and does not overflow.
Source : Cistech's Waterjet Technical Team